YRT bearing

　　Features: axial / radial bearing YRT
　　YRT bearing by a thrust / radial seat, a thrust and radial shaft washer, a thrust washer, two needle keep frame component and a group of radial cylindrical roller. Seat ring and shaft ring with screw holes with uniform installation. This type of bearing with high axial and radial load capacity. High tilt stiffness and high accuracy. Suitable for rotary table, bearing chuck and cutter head configuration and measurement and experiment in. This type of bearing equipment parts to match the requirements of high. When installing the required control installation screw tightening torque.
　　Bearing characteristics:
　　1, high precision, precision can reach P4, P2;
　　2, high rigidity: this series of bearing with preload;
　　3, high bearing can bear axial load, radial load and overturning loads.
　　4, high speed, high speed can be applied to the work of YRTS series bearings.

　　Scope of application: widely used in precision rotary table indexing head, vertical grinder, hobbing machine, milling machine and other precision workpiece axis device.

	boundary dimensions								fixing holes
bearing   type
	d	D	H	H1	C	D1	J	J1	inner ring				outer ring
	unit: mm								d1	d2	a	quantity	d3	quantity
									mm				mm
YRT50	50	126	30	20	10	105	63	116	5.6	9	4.2	10	5.6	12
YRT80	80	146	35	23.35	12	130	92	138	5.6	10	4.2	10	4.6	12
YRT100	100	185	38	25	12	160	112	170	5.6	10	5.4	16	5.6	15
YRT120	120	210	40	26	12	184	135	195	7	11	6.2	22	7	21
YRT150	150	240	40	26	12	214	165	225	7	11	6.2	34	7	33
YRT180	180	280	43	29	15	244	194	260	7	11	6.2	46	7	45
YRT200	200	300	45	30	15	274	215	285	7	11	6.2	46	7	45
YRT260	260	385	55	36.5	18	345	280	365	9.3	15	8.2	34	9.3	33
YRT325	325	450	60	40	20	415	342	430	9.3	15	8.2	34	9.3	33
YRT395	395	525	65	42.5	20	486	415	505	9.3	15	8.2	46	9.3	45
YRT460	460	600	70	46	22	560	482	580	10	15	8.2	46	10	45
YRT580	580	750	90	60	30	700	610	720	11.4	18	11	46	11.4	42
YRT650	650	870	122	78	34	800	680	830	14	20	13	46	14	42
YRT850	850	1095	124	80.5	37	1018	890	1055	18.5	26	17	57	18.5	54
YRT950	950	1200	132	86	40	1130	990	1160	18.5	26	17	57	18.5	54
YRT1030	1030	1300	145	92.5	40	1215	1075	1255	18.5	26	17	66	18.5	66
YRT1200	1200	1490	164	108	52	1410	1240	1445	18.5	26	17	66	18.5	66

YRT turntable bearing
bearing type	boundary   dimensions									(µ   m)radial runout and axial runout
	d			D			H	H1
	Nominal dimension	high	low	Nominal   dimension	high	low	Nominal   dimension		Deviation
								Nominal   dimension
	Units: mm
YRT50	50	0	-0.008	126	0	-0.011	30	20	± 0.125	2
YRT80	80	0	-0.009	146	0	-0.011	35	23.35	± 0.15	3
YRT100	100	0	-0.01	185	0	-0.015	38	25	± 0.175	3
YRT120	120	0	-0.01	210	0	-0.015	40	26	± 0.175	3
YRT150	150	0	-0.013	240	0	-0.015	40	26	± 0.175	3
YRT180	180	0	-0.013	280	0	-0.018	43	29	± 0.175	4
YRT200	200	0	-0.015	300	0	-0.018	45	30	± 0.175	4
YRT260	260	0	-0.018	385	0	-0.02	55	36.5	± 0.2	6
YRT325	325	0	-0.023	450	0	-0.023	60	40	± 0.2	6
YRT395	395	0	-0.023	525	0	-0.028	65	42.5	± 0.2	6
YRT460	460	0	-0.023	600	0	-0.028	70	46	± 0.225	6
YRT580	580	0	-0.025	750	0	-0.035	90	60	± 0.25	10
YRT650	650	0	-0.038	870	0	-0.05	122	78	± 0.25	10
YRT850	850	0	-0.05	1095	0	-0.063	124	80.5	± 0.3	12
YRT950	950	0	-0.05	1200	0	-0.063	132	86	± 0.3	12
YRT1030	1030	0	-0.072	1300	0	-0.08	145	92.5	± 0.4	15
YRT1200	1200	0	-0.075	1490	0	-0.085	164	108	± 0.3	15

bearing type	Number of retaining screws	Extraction thread hole		Number of pitches X angle of pitches	Screw tightening torque	Basic load rating				Limiting speed	Bearing frictional torque
						axial		radial
						dynamic  load	static load	dynamic load	static load
					MA2)	Ca	Coa	Cr	Coa	脂grease
		G	quantity		Nm	KN				r/min	Nm
				quantity
YRT50	2	-	-	12* 30°	8.5	38	158	28.5	49.5	440	2.5
YRT80	2	-	-	12* 30°	8.5	56	255	42.5	100	530	3
YRT100	2	M5	3	18* 20°	8.5	76.5	415	47.5	120	430	3
YRT120	2	M8	3	24* 15°	14	102	540	52	143	340	7
YRT150	2	M8	3	36* 10°	14	112	630	56	170	320	10
YRT180	2	M8	3	48* 7.5°	14	118	710	69.5	200	280	12
YRT200	2	M8	3	48* 7.5°	14	120	765	81.5	220	260	14
YRT260	2	M12	3	36* 10°	34	160	1060	93	290	200	20
YRT325	2	M12	3	36* 10°	34	275	1930	120	345	170	40
YRT395	2	M12	3	48* 7.5°	34	300	2280	186	655	140	55
YRT460	2	M12	3	48* 7.5°	34	355	2800	200	765	120	70
YRT580	2	M12	6	48* 7.5°	68	490	4250	228	965	80	140
YRT650	2	M12	6	48* 7.5°	116	1040	8000	490	1800	65	200
YRT850	3	M16	6	60* 6°	284	1000	8650	455	1730	50	300
YRT950	3	M16	6	60* 6°	284	1290	11400	530	2040	40	600
YRT1030	6	M16	6	72* 5°	284	1380	12000	620	2650	35	800
YRT1200	6	M16	6	72* 5°	300	1435	12850	745	2800	25	1000